Dtl-Sub - Hitachi HV-D30 Operation Manual

8) Initialize : Returns level menu settings to preset values. Simultaneously press L
and R for about 2 seconds.
9) File select : Selects scene files 1 - 4 and preset.
10) DTL SUB : Change to DTL SUB menu.
12. DTL SUB
1) LEVEL DEP : Dependent level setting
Detail amount, and noise, can be reduced in scene dark components.
Setting range is -128 to +127. Press the R button to increase the value, reduce the
detail amount and expand the video signal level range. Press L button to decrease
the value and reduce the range. Set to 0 by simultaneously pressing the L and R
buttons for about 2 seconds.
2) CRISP : Crispness level setting
Reduces noise when DTL setting is in the range of -128 to 127. However, at high
settings, some loss of sharpness occurs in detailed scene components.
range is -128 to +127. Press the R button to increase the value and the detail noise.
Press the L button to decrease the value and reduce detail noise. Set to 0 by
simultaneously pressing the L and R buttons for about 2 seconds.
3) H/V BALANCE : Balance setting for horizontal and vertical detail amount
Setting range is -128 to +127. Press the R button to increase the value and reduce
the H DTL amount. Press the L button to decrease the value and reduce the V
DTL amount. Set to 0 by simultaneously pressing the L and R buttons for about 2
seconds.
4) Initialize : Returns DTL SUB menu settings to preset values. Simultaneously press
L and R for about 2 seconds.
26
Setting