Hitachi BD-D120XGV Instruction Manual page 61

In this case
Unable to pair the
washer dryer with a
smartphone.
Easy connection
fails.
If the washer dryer and the wireless LAN router are far apart, the signal may be
weak.
Please move the wireless LAN router closer to the washer dryer or use a
repeater for the wireless LAN router.
Pairing can only be carried out with one device at a time.
Do not pair with more than one smartphone at the same time.
You can only pair up to 5 smartphones with your washer dryer.
With the paired smartphones, delete the unwanted registrations from "Menu",
"Connection Settings", "Name settings", and "Check/delete registered users" in
the application.
When pairing the smartphone with the washer dryer, after selecting the SSID of the
washer dryer, the message "Your smartphone is not connected with the router" may
appear. In this case, the pairing may fail. You may be able to proceed with pairing by
doing the following:
● If you see the "Your smartphone is not connected with the router" message,
select the router that you want to connect from Wi-Fi setting in your
smartphone.
If this is not the case, please turn off your washer dryer, smartphone, and
wireless LAN router, wait a few moments and then turn them back on again.
If pairing fails without a " " mark in Step 1 to Step 2 on the application screen
display, please try pairing again, paying attention to the following information.
If you do not get a " " mark on Step 1
● When you press the wireless connection button on the wireless LAN router,
make sure it is connected to the 2.4GHz band.
For the wireless LAN router's status, when you press the wireless connection
button, please refer to the instruction manual of the wireless LAN router.
● When you change the washer dryer to pairing mode, make sure that
"Pr 1" is flashing.
If "Pr 1" is lit instead of flashing, press the "Remote" button on the washer
dryer.
● Make sure that your smartphone is connected to the wireless LAN router to
which the washer dryer is connected.
On the App screen, check that the SSID of the wireless LAN router to which
your smartphone is connected is correct. If it is not, change the connection
point in the Wi-Fi settings of your smartphone.
● After pressing the wireless connection button on the wireless LAN router and
changing the washer dryer to pairing mode, check that the (communication
lamp) on the washer dryer changes from flashing to lit.
｢ 」
If the (communication lamp)
described in the section "Unable to operate the machine from a smartphone".
If you do not get a " " mark in Step 2
● Depending on your wireless LAN router's configuration and environment, the
connection may be unstable and fail to connect.
● Make sure that the (communication lamp)
If (communication lamp)
section "Unable to operate the device from a smartphone".
Check here
does not light up, please check the details
｢ 」
｢ 」
is not lit, please check the information in the
｢ 」
on the washer dryer is lit.
61