Hitachi 62VS69 Operating Manual page 58

Lamp Replacement
3. Loosen the screw securing the lamp unit with a Phillips head screw driver as shown. Remove the lamp
unit by holding the lamp handle , then pulling outwards.
LAMP UNIT
CAUTION: The lamp is very hot and may cause fire or severe burns. Wait at least 30~45 minutes to allow the
lamp to cool before proceeding with lamp removal.
NOTE: Do not put your hand in the Lamp Storage area after the Lamp Unit is removed, your may get burned.
4.
Replace with the new lamp.
Place the removed lamp into the empty box of the replacement lamp. Do not touch the front glass of the new
lamp or its receptacle. This may shorten the life of the lamp and reduce the picture quality.
• Push the lamp unit back to its original position.
• Tighten the screw firmly on the lamp unit. If it is loose, the TV may not operate correctly.
PUSH INWARDS
THE LAMP UNIT
58
Turn counterclockwise to loosen the lamp unit screw.
HANDLE
LAMP UNIT
PULL OUTWARDS
THE LAMP UNIT
LAMP UNIT
Turn clockwise to tighten
the screw of the lamp unit.