Table of Contents
Advertisement
Timers
Set Event Timer
This function will automatically operate the Projection
TV viewing reservation of a program. If the clock is not
set, you can not use this function and the screen below
will appear. The message on the screen will disappear
after 3 seconds, then the screen automatically goes to
the clock setup mode (see page 47).
1. Use the CURSOR buttons
EVENT 1, EVENT 2, EVENT 3, EVENT 4 and then
press the SELECT button to select. A ✔ in the
box means the selected event is enabled.
2. Use the CURSOR buttons
and select START TIME HOUR/MINUTE, AM OR
PM.
3. Use the CURSOR buttons
and select FINISH TIME HOUR/MINUTE, AM or
PM.
4. Use the CURSOR buttons
DAY and YEAR.
5. Use the CURSOR buttons
and select CABLE or AIR.
6. Use the CURSOR buttons
channel the TV will tune to.
NOTE: 1. When the INFO button is pressed, the Event Timer Icon in the bottom right corner of the screen will
display the start time.
2. The OFF TIMER will only activate if the TV was turned on by the ON TIMER and no channel
selection was made after this time. If you change the channel after the ON TIMER has been
activated, the OFF TIMER will deactivate.
3. If no remote control button is pressed after viewing reservation is activated, the TV will
automatically turn off after three hours. Therefore, do not SET EVENT TIMER for more than three
hours if you do not plan to control your television with the remote control.
4. When a CableCARD is installed or removed, EVENT SETTINGS of the CABLE mode are cancelled.
5. When the CLOCK is changed in the SET THE CLOCK function, events are disabled and the check
mark is removed
CAUTION: Do not use your TV as a deterrent when away from home by using the ON and OFF
TIMERS. For safety, the TV should be turned off when you are away from home.
or
to highlight
,
or
to highlight
,
or
to highlight
or
to set MONTH,
,
or
to highlight
,
or
to set the
Please wait while we take you
to set
clock.
Timers
Set The Clock
-- : -- PST
Set Sleep Timer
0:00
Set Day/Night Timer
Not Set
Set Event Timer
Not Set
Move
SEL
Set
Timers
Set Event Timer
OR
❑ Event1
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event2
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event3
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event4
:
-- : -- AM - -- : -- AM
Cable
-------
Move
Return
SEL
Timers
Set Event Timer
❑ Event1
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event2
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event3
:
-- : -- AM - -- : -- AM
Cable
-------
❑ Event4
:
-- : -- AM - -- : -- AM
Cable
-------
Move
Return
SEL
4:11 PM
Jan. 1 2005
Jan. 1 2005
Jan. 1 2005
Jan. 1 2005
4:11 PM
Jan. 1 2005
Jan. 1 2005
Jan. 1 2005
Jan. 1 2005
49
Hide quick links:
Advertisement
Table of Contents
