Advertisement
OPERATION
1.
Before inserting the plug into an electrical outlet, make sure that the
electrical supply in your area matches that on the rating label on the unit.
2.
When plugged in, turn on the Main power switch at the back of the unit.
3.
When in Standby mode, only the switch
respond to your touch, and the LED display shows the room temperature.
Press
to access the rest of the control panel.
a)
Low Power: 1000W (Press
b)
High Power: 2000W (Press
c)
TIMER: Press this button
the heater will turn itself off (From 0 hour to 8 hours)
a)
+ , - : adjust room temperat ure .Temperature setting from 10-35
d
degree. "+" to increase the desired temperature and "-" to decrease
the desired temperature.
e
b)
Osc : Press
c)
Press
f
seconds of cool air after turn off it . this design can protect item use
longer.
to activate oscillation. Press it again to cancel.
.
to turn off the heater, the unit will
3
on the control pa nel will
to switch it)
to switch it)
repeatedly to set a period after which
keep working 3 0
Advertisement
