Advertisement
CIS—80MKI
Welcome
Thank you for choosing CIS! This quick setup guide will assist you with getting your CIS router up and
running. For more detailed configuration, please check the user manuals located on our website. If you
have any questions, please do not hesitate to contact our support team.
Powering the Router
OR
PoE
Connect the included power supply to the DC jack on the rear of the device, or power via PoE on ETH1
Initial Configuration
Your Computer
ISP's Modem
Connect your ISP's modem to the WAN port. Connect your laptop or computer to any of the remaining
ports.
Advertisement
Table of Contents
Related Manuals for CIS CIS-80MKI
Summary of Contents for CIS CIS-80MKI
- Page 1 CIS—80MKI Welcome Thank you for choosing CIS! This quick setup guide will assist you with getting your CIS router up and running. For more detailed configuration, please check the user manuals located on our website. If you have any questions, please do not hesitate to contact our support team.
- Page 2 Overview The CIS-80MKI has 5 Gigabit Ethernet ports and 5 Fast Ethernet ports (all ports support Auto MDI/X), an SFP port, and a USB 2.0 port (reserved for future use). It can be powered via the DC jack on the rear (8—...
- Page 3 Ethernet adapter to “Using DHCP” 2. Obtain the IP Address of the Default Gateway. CIS Routers use 10.100.1.1 as the default. You can open a command prompt on a Windows machine and enter ipconfig to get the default gateway.
- Page 4 Hold this button while the device is powered off, then apply power. Keeping holding until the USR LED light starts flashing, (5 seconds) then release the button to reset to the default CIS configuration. You can use this procedure if you have forgotten the password to access the device, or simply wish to return the unit to its default configuration state.
Need help?
Do you have a question about the CIS-80MKI and is the answer not in the manual?
Questions and answers