Front Controls; Front View - Hitachi UltraThin LE42S704 Owner's Manual

Front Controls

FRONT VIEW

POWER Button
This button is for turning ON the LCD TV, in order to turn the TV
On , the standby indicator must be lit red. If the indicator is off,
plug the power cord into the AC outlet.
VOLUME (+/-) Level
Press these buttons to adjust the sound level. The volume level
will be displayed on the TV screen. These buttons also serve as
the CURSOR left (◄) and right (►) buttons when in the MENU
system.
CHANNEL Selector
Press these buttons until the desired channel appears in the
top right corner of the TV screen. These buttons also serve
as the CURSOR down ( ) and up ( ) buttons when in the
MENU system.
MENU Button
This button allows you to enter the MENU, making it possible
to set TV features to your preference without using the remote
control. This button also serves as the Return button when in
the MENU system.
INPUT Button
Press this button to access the INPUT menu.
POWER Light Indicator
To turn the TV ON, press the ( /l) POWER button (
indicator lamp located on the lower right corner of the front
bezel illuminates to indicate the TV power is ON.
Indicating Power
Lamp Status
Lights OFF
Red (Stand-by)
Lights
ON
Blue
Quickly
ON
Blinking Red
9
). A blue
Operating
When the LCD TV is plugged
to the AC outlet.
TV Power is ON; picture is
shown.
The TV is powering OFF.
It will soon be in the Off
(Stand-by) state.
5 4 3
REMOTE CONTOROL Sensor
Point your remote control at this area when selecting channels,
adjusting volume, etc.
LIGHT Sensor
This area detects ambient light level for automatic screen
brightness control.
ACCENT LIGHT
The Accent Light illuminates when the TV is turned on. The
brightness can be adjusted or it can be turned off. (See page
38.)
• Your Hitachi LCD TV will not show any picture if
NOTES
there is no video input when HDMI 1/DVI, HDMI 2
~ HDMI 4, Component, or AV is selected. Instead,
a message will indicate "No Signal", and the Power
Light will remain Blue until the TV is turned off or in
Stand-by mode (lights red) when not in use.
• The remote control can turn the TV On/Off as well
as control various devices and any compatible
HDMI CEC devices.
• Please do not put anything around the remote
control sensor.
8 7 6
2 1
9