Table of Contents
Advertisement
Troubleshooting table / Specifications
Troubleshooting table
Please check the following items, before you request for service.
Symptom
No picture, no sound
No reception
The TV switches off with
missing antenna input signal
In
menu, TUNING-line
can not be selected.
Wrong Colours
Specifications
Color System:
Frequency Range:
Power Supply:
Power Consumption:
LCD:
HDMI input:
Output Power:
Surrounding temperature:
Operating Humidity:
Dimensions:
Weight:
Accessories:
Weight and dimensions are approximate. Because we continually strive to improve our products we
may change specifications and designs without prior notice.
3V90441A [E] P40-BACK
32LD380TA
Possible solution
Switch on the set.
Check the 100~240 V wall outlet.
Select appropriate input mode.
Preset the station without using the AV cable.
Press 1 on the remote control.
Connect the antenna.
Check your antenna.
This is normal.
15 minutes after the antenna signal has disappeared,
the set will change to standby.
The unit is set to AV mode. Press 1 on the remote
control.
Colour and Brightness errors can occur when the
viewing angle / ambient air temperature (see technical
specifications) are exceeded.
PAL/SECAM/NTSC
1~S6, S7~S36, S37~E69
AC 100~240V, 50/60Hz
Operation: approx. 170W
Stand by: approx. 1W
31.5" TYPE (80 cm visible)
TFT low-glass Active Matrix Colour LCD, 1366 x 768 Pixel
Brightness: 500 cd/m2
View Lange:Left/Right: 85 degree Up/Down: 85 degree
HDMI compliant (type A connector)
HDCP compliant
Suggested scan rates:
PAL: 576i/576p/720p/1080i
NTSC: 480i/480p/720p/1080i
HDMI Audio: 2-channel PCM
32/44.1/48 kHz sampling frequency
16/20/24 bits per sample
10W x 2 (MAX)
Operation: 5°C ~ 40°C
Storage: –20°C ~ 60°C
Less than 80%RH
82.2(W) x 60.4(H) x 33.3(D) cm
approx. 19 kg (w/o Accessories)
2 batteries (AAA/R03/UM-4)
Remote control unit
AC cord
HITACHI
41
Page
31/10/05, 9:22 AM
18
12
12
23
20
41
Advertisement
Table of Contents
