Table of Contents
Advertisement
Location of controls
Left Side
6
7
8
Description of Indicators and Controls
1.
(SUB-POWER) button: To turn the unit standby mode on and off.
2. INPUT-button: Select input mode for TV/AV/COMPONENT/HDMI/PC.
3. MENU-button: To display the menu-screen.
▲/▼ buttons : To adjust the volume. In Menu : Setting.
4. VOLUME
5. PROGRAM ▲/▼ buttons: Press ▲ to change to a higher numbered channel set into memory. Press
▼ to change to a lower numbered channel set into memory. In Menu : Setting. In Standby : Turning
on the unit.
6. HEADPHONES jack: Plug headphones with a mini plug (3.5 mm) into this jack.
7. AV3-Input: Input for analogue A/V-Signal (Composite). If your equipment has an S-video connector,
use an S-video cable instead of a standard yellow video cable (You still must connect the standard
red and white audio cables for full system connection, but do not connect a standard yellow video
cable at the same time or the picture performance will be unacceptable.)
8. Main Power Switch: To turn the unit on or off completely.
9. Loudspeakers
10. Remote sensor
11. STANDBY/ON mode indicator: It lights up in red at STANDBY, and in green at POWER ON.
3V90441A [E] P09-12
32LD380TA
1
2
3
Top
Front Side
9
HITACHI
9
4
5
Approx. 2˚
10
11
You can adjust the angle of
the TV-screen for 2˚ forward
or for 6˚ backward from
vertical angle.
31/10/05, 9:21 AM
Right Side
Approx. 6˚
9
Advertisement
Table of Contents
