Hitachi 32LD380TA User Manual page 18

Connections to other equipment
To connect the LCD television to a HDMI or a DVI device
The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed
digital video from a DVI device.
When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only the video signal.
Separate analog audio cords are required.
Rear lower of the
LCD television
HDMI, the HDMI logo and High-
Definition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC.
NOTE:
You must choose an appropriate setting for each connection
To connect the LCD television to a PC (Personal Computer)
Before you connect this LCD television to your PC, change the adjustment of your PC's Resolution and
Refresh rate (60 Hz).
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to
the VGA connector PC MONITOR on the back of the LCD television. Attach the connectors firmly with the
screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio output of
your Multimedia computer and to the AUDIO connector of the PC AUDIO IN jack of the LCD television.
Switch on the computer. The LCD television can operate as the computer monitor.
Rear lower of the LCD television
To PC IN
Note:
If there is no video signal from the computer when the unit is in PC mode, "NO SYNC. SIGNAL" will appear
on the TV-screen for approx. 10 seconds.
16
3V90441A [E] P13-17
32LD380TA
HDMI - to - DVI adapter cable
(HDMI type A connector)
(not supplied)
HDMI cable (type A connector)
(not supplied)
To PC AUDIO
IN jack
Audio cord (not supplied)
VGA cable (not supplied)
HITACHI
16
Audio cord (not supplied)
To DVI output
or
To HDMI out
.
36
Monitor Television modes
MODE Resolution
VGA 640x480
VGA 720x400
WVGA 848x480
SVGA 800x600
XGA 1024x768
WXGA 1280x720/768
WXGA 1360x768
31/10/05, 9:21 AM
Refresh rate
60Hz
70Hz
60Hz
60Hz
60Hz
60Hz
60Hz