Power Management - Gigabyte GA-Z87M-HD3 User Manual

2-6

Power Management

Resume by Alarm
If enabled, set the date and time as following:
Wake up hour/minute/second: Set the time at which the system will be powered on automatically.
Note: When using this function, avoid inadequate shutdown from the operating system or removal of the
AC power, or the settings may not be effective.
ErP
Note: When this item is set to Enabled, the following functions will become unavailable: PME event wake
up, power on by mouse, power on by keyboard, and wake on LAN.
Soft-Off by PWR-BTTN
Delay 4 Sec Press and hold the power button for 4 seconds to turn off the system. If the power
button is pressed for less than 4 seconds, the system will enter suspend mode.
RC6(Render Standby)
Allows you to determine whether to let the onboard graphics enter standby mode to decrease power
AC BACK
Determines the state of the system after the return of power from an AC power loss.
Always On The system is turned on upon the return of the AC power.
Memory The system returns to its last known awake state upon the return of the AC power.
Power On By Keyboard
Allows the system to be turned on by a PS/2 keyboard wake-up event.
Note: To use this function, you need an ATX power supply providing at least 1A on the +5VSB lead.
Any Key Press any key to turn on the system.
- 29 -