Sony WI-C100 Help Manual page 45

Wake the computer up if the computer is in standby (sleep) or hibernation mode.
2
Pair the headset using the computer.
3
Select [ (System Preferences)] - [Bluetooth] from the Dock at the bottom of the screen.
1.
2. Select [WI-C100] of the [Bluetooth] screen and click [Connect].
If Passkey (*) input is required, input "0000".
The headset and computer are paired and connected with each other.
You will hear the voice guidance say, "Bluetooth connected".
If they are not connected, see
If [WI-C100] does not appear on the computer screen, try again from the beginning of step
*
A Passkey may be called "Passcode", "PIN code", "PIN number", or "Password".
Hint
The operation above is an example. For more details, refer to the operating instructions supplied with the computer.
"Connecting to a paired computer
45
(Mac)".
.