Qlima H 824 Operating Manual page 51

Overfall gap
SCALE REMOVAL METHOD:
For long-term use, there will be scale deposit on the mechanical sink and vibrating piece,
the scale will reduce the atomization effect. Therefore, it is recommended to clean the
scale in the sink and the vibration piece every week.
1.
2.
3.
man_H824 ('21) V3.indd 51 man_H824 ('21) V3.indd 51
Pour the disincrustant into the water tank, add warm water of about 60 °C, let the
disincrustant completely dissolve and soak for 5-10 minutes.
Clean the dirt on the sink wall and the vibrating plate with a brush or a clean soft cloth.
Pour out the water. Be careful to avoid the location of the air outlet to prevent water
enter the base, cause the circuit board to short-circuit and damage.
Disincrustant
Overfall gap
Warm
water
80 °C
Air outlet
4
51
16-12-2021 17:17 16-12-2021 17:17