Operation - Renkforce KW-9280 Operating Instructions Manual

Operating instructions
Radio wall clock KW-9280
Item no. 1299483
Intended use
The product is intended to display the time of day, the date and the temperature. The
time of day can be set automatically by radio signal or manually. The product also
features an alarm. Power supply is via 4 AA batteries (not included).
It is intended for indoor use only. Do not use it outdoors. Contact with moisture, e.g. in
bathrooms, must be avoided under all circumstances.
For safety and approval purposes (CE), you must not rebuild and/or modify this product.
If you use the product for purposes other than those described above, the product
may be damaged. Read the instructions carefully and keep them. Make this product
available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All
company names and product names are trademarks of their respective owners. All
rights reserved.
Delivery content
• Radio wall clock
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety
information. If you do not follow the safety instructions and information on
proper handling in this manual, we assume no liability for any resulting
personal injury or damage to property. Such cases will invalidate the
warranty/guarantee.
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may
become dangerous playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong
jolts, high humidity, moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• If it is no longer possible to operate the product safely, take it out of
operation and protect it from any accidental use. Safe operation can no
longer be guaranteed if the product:
- is visibly damaged,
- is no longer working properly,
- has been stored for extended periods in poor ambient conditions or
- has been subjected to any serious transport-related stresses.
• Please handle the product carefully. Jolts, impacts or a fall even from a
low height can damage the product.
• Correct polarity must be observed while inserting the (rechargeable)
batteries.
• (Rechargeable) batteries should be removed from the device if it is not
used for a long period of time to avoid damage through leaking. Leaking
or damaged (rechargeable) batteries might cause acid burns when in
contact with skin, therefore use suitable protective gloves to handle
corrupted (rechargeable) batteries.
• (Rechargeable) batteries must be kept out of reach of children. Do not
leave (rechargeable) batteries lying around, as there is risk, that children
or pets swallow them.
• All (rechargeable) batteries should be replaced at the same time.
Mixing old and new (rechargeable) batteries in the device can lead to
(rechargeable) battery leakage and device damage.
• (Rechargeable) batteries must not be dismantled, short-circuited or
thrown into fire. Never recharge non-rechargeable batteries. There is a
risk of explosion!
• Consult an expert when in doubt about operation, safety or connection of
the device.
• Maintenance, modifications and repairs are to be performed exclusively
by an expert or at a qualified shop.
• If you have questions which remain unanswered by these operating
instructions, contact our technical support service or other technical
personnel.
Operating elements
12
11
10 9 8
1 RESET button
2 SNOOZE button
3 Suspension device
4 ALARM MODE switch
5 Battery compartment cover
6 Stand
Positioning
a) General
To ensure proper reception of the radio signal, the product should not be positioned or
installed next to other electronic devices, cables, metal components, etc.
b) Wall installation
• There is a suspension device (3) on the back of the product, which you can use to
install the product to a suitable wall.
• A suitable screw (not included) is required for wall installation.
c) Set-up
• Choose an even, flat and stable location for the device.
• Protect valuable furniture surfaces with a suitable pad to prevent scratching.
• Fold out the stand (6) and set up the product stably so that it cannot fall down.

Operation

a) Inserting / replacing batteries
• Remove the battery compartment cover (5) from the back of the device.
• Insert 4 AA batteries, observing correct polarity. Heed correct polarity as indicated
in the battery compartment.
• Close the battery compartment.
Replace the batteries when display operation weakens significantly.
The time requires resetting each time you replace the batteries.
b) Automatically setting the time
• Once you have inserted the batteries, the product searches immediately and
automatically for the time signal. The reception icon flashes on the analogue
display (12).
flashes
Radio signal scan Successful reception
• The product searches automatically for the time signal daily at 2:00 am and 3:00 am.
If the scan fails, the product will search again at 4:00 am and 5:00 am.
• To start or stop the automatic scan for the time signal, press and hold the button
▼ (9) for 3 seconds.
• It will take some minutes for the signal to be received and for the time to be set
automatically. During this time, do not move the product nor push any buttons.
• The reception icon remains lit when reception is successful.
1 2
7 6 5
7 AL ON/OFF button
8 ▲ button
9 ▼ button
10 MODE/SET button
11 Digital display
12 Analogue display
lights up goes out
Radio signal scan failed
3
4