Advertisement
Connections - (ACC060-062, ACC100-103, ACC150-153)
For operation with a door access control panel and lock, the "Push to Exit"
button is wired with NC or NO.
Connections - (ACC063)
For operation with a door access control panel and lock, the "Push to Exit"
button is wired with NC or NO.
The ACC063 also has a built in blue LED which requires 12V DC (not
supplied with the product).
Troubleshooting
If the "Push to Exit" is not activating the lock then there is likely a shorted wire, open circuit or some other failed
device in the circuit.
To identify where the fault is, each wired connection in the circuit needs to be tested working from the push
button progress through, including the keypad, the access controller, power supply and the magnetic lock.
If the fault is with the access control button then check the connection wires for continuity and for trapped
wires. Check for water ingress on the wired connections. Check the polarity in the power connections and
ensure the NO or NC connections are connected to the proper terminals.
Specification
ACC060/1/2
Construction Stainless Steel
NO/NC/Common
Terminals
0.5-1A 12V DC
Rating
N/A
LED Colour
IP65 Wateproof
IP Rating
86 x 86 x 42mm
Dimensions
All specifications are approximate. System Q Ltd reserves the right to change product specifications or features without notice. Whilst every effort is
made to ensure that these instructions are complete and accurate, System Q Ltd cannot be held responsible for any losses, no matter how they arise,
from errors or omissions in these instructions, or the performance or non-performance of the equipment refered to.
Quick Start Guide - qACC060-063, qACC100-103, qACC150-153
This symbol indicates that equipment must not be mixed with general household waste. For treatment, recovery and recycling please return to your local designated
2
WEE/CG0783SS collection point as defined by your local council.
ACC063
Stainless Steel
NO/NC/Common/ +12V
DC/ GND
0.5-1A 12V DC
Blue LED
IP65 Wateproof
86 x 86 x 42mm
Press To Exit Buttons
Zap is a registered trademark of System Q Ltd
ACC100/1/2/3
Front – Stainless Steel /
Button - Plastic
NO/NC/Common
0.5-1A 12V DC
N/A
Internal Use Only
86 x 86 x 30mm
ACC150/1/2/3
Front – Stainless Steel /
Box & Button -
Polycarb
O/NC/Common
0.5-1A 12V DC
N/A
Internal Use Only
86 x 86 x 30mm
Copyright 2021 System Q Ltd
Advertisement
