1. Manuals
  2. Brands
  3. Crosby Manuals
  4. Lifting Systems
  5. Clamp-Co F-5
  6. User manual

Crosby Clamp-Co F-5 User Manual

Hide thumbs
1
2
3
4
5
6
7
8
Table of Contents

Advertisement

Quick Links

Download this manual
BEAM CLAMP
USERS MANUAL
Model Numbers:
F-5, F-15, F-25, F-35, NS-15, NS-25, NS-35
IMPORTANT
Make certain all persons that may use, inspect, or maintain this equipment carefully read
and understand this manual. Retain this manual in permanent file.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Clamp-Co F-5 and is the answer not in the manual?

Questions and answers

Related Manuals for Crosby Clamp-Co F-5

Summary of Contents for Crosby Clamp-Co F-5

  • Page 1 BEAM CLAMP USERS MANUAL Model Numbers: F-5, F-15, F-25, F-35, NS-15, NS-25, NS-35 IMPORTANT Make certain all persons that may use, inspect, or maintain this equipment carefully read and understand this manual. Retain this manual in permanent file.

  • Page 2: General Information

    Warning and Operating Procedure Labels. Crosby Clamp-Co beam clamps have been safely and successfully used in the field for over 30 years. Your safe use of our products depends on you. Please be responsible and make sure all people using our products follow these simple rules: Beam Clamps are used to the purpose for which they were designed.

  • Page 3: Product Warnings

    Temperature and environment: The temperature at which the standard lifting clamps may be used lies between 212 F° (100 C°) and -40 F° (-40 C°). For other temperatures and for use in hazardous environmental conditions, consult The Crosby Group technicians.
  • Page 4 Disengage chain and place “S” hooks end of chain on the keeper hooks. Pull the tongs away from the flanges and lift the clamp free from the beam Figure 5 (See Figure 5). Copyright® 2014 The Crosby Group LLC All Rights Reserved...

  • Page 5: Inspection And Maintenance

    ANSI B30.20. Proper maintenance of the beam clamp includes a daily inspection and weekly lubrication. There are labels attached to the clamp frame which provide required maintenance, inspection and lubrication recommendations. Product labels should be replaced when they are no longer legible. Contact The Crosby Group for replacement labels. •...

  • Page 6: Inspection And Maintenance Check List

    Are the Working Load Limit, Serial Numbers and Warning labels legible? • Have all inspections and maintenance been regularly recorded? • Does the Crosby Clamp-Co product carry its original Identification Plate and Warning information? • If the identification plate has been damaged or removed, the clamp shall be taken out of service and arrangements made to replace the identification plate.
  • Page 7 BEAM CLAMP MODELS There our several Crosby Clamp-CO beam clamp models. They are designed for use with beams of different weights and flange dimensions. See list of models on this page. It is important that the correct clamp model is used for each beam size and weight that is lifted.
  • Page 8 2801 Dawson Rd., Tulsa, OK 74110 P: (918) 834-4611 F: (918) 832-0940 www.thecrosbygroup.com crosbygroup@thecrosbygroup.com 9992279 07/31/14...

This manual is also suitable for:

Clamp-co f-15Clamp-co f-25Clamp-co f-35Clamp-co ns-15Clamp-co ns-25Clamp-co ns-35

Table of Contents