Belkin OmniView PRO2 Quick Installation Manual page 2

To install the Switch, you will need the following:
OmniView PRO2
Rack-Mount 12V/1A Power VGA Monito
r
KVM Switch
Brackets with Supply (included)
(included)
Screws (included)
USB or PS/2 Keyboard USB or PS/2 Mouse Belkin Dual-Port
Micro-Cable Kit
[Belkin Part No. F1D9400-XX
(PS/2-style) or F1D9401-XX
(USB-style)]
Introduction
This Quick Installation Guide will guide you through the steps needed
to install the OmniView PRO2 KVM Switch (the Switch). If you have any
problems during this installation, please refer to the User Manual.
Introduction 2