Personal Safety - Harbor Freight Tools 93662 Assembly And Operating Instructions Manual

Stay alert. Watch what you are doing, and use common sense when operat-
1.
ing a power tool. Do not use a power tool while tired or under the influence
of drugs, alcohol, or medication. A moment of inattention while operating power
tools may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
2.
Keep your hair, clothing, and gloves away from moving parts. Loose clothes,
jewelry, or long hair can be caught in moving parts.
Avoid accidental starting. Be sure the Power Switch (98A) is in its "OFF"
3.
position before moving the Water Pump and before performing any service,
maintenance, or cleaning procedures on the unit.
Remove adjusting keys or wrenches before turning the Water Pump on.
4.
wrench or a key that is left attached to a rotating part of the machine may result in
personal injury.
Do not overreach. Keep proper footing and balance at all times.
5.
and balance enables better control of the power tool in unexpected situations.
Use safety equipment. Always wear eye protection. Always wear ANSI
6.
approved safety impact goggles when using this product. ANSI approved
hearing protection must also be used.
Do not force the tool. Use the c
1.
will do the job better and safer at the rate for which it is designed.
Do not use the Water Pump if the Engine's Power Switch (98A) does not turn
2.
it on or off. Any tool that cannot be controlled with its power switch is dangerous
and must be replaced.
Store idle tools out of reach of children and other untrained persons.
3.
are dangerous in the hands of untrained users.
Maintain tools with care.
4.
are less likely to bind and are easier to control. Do not use a damaged tool. Tag
damaged tools "Do not use" until repaired.
Check for misalignment or binding of moving parts, breakage of parts, and any
5.
other condition that may affect the tool's operation. If damaged, have the tool
serviced before using. Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your
6.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
SKU 93662 For technical questions, please call 1-800-444-3353.

PERSONAL SAFETY

TOOL USE AND CARE
orrect tool for your application. The correct tool
Properly maintained tools with a sharp cutting edge
A
Proper footing
Tools
Page 3