Table of Contents
Advertisement
Use only accessories that are recommended by the manufacturer for your
23.
model. Accessories that may be suitable for one tool may become hazardous
when used on another tool.
Tool service must be performed only by qualified repair personnel. Service
24.
or maintenance performed by unqualified personnel could result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow
25.
instructions in the "Inspection, Maintenance, And Cleaning" section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of electric shock or injury.
Maintain labels and nameplates on the Circular Saw. These carry impor-
1.
tant information. If unreadable or missing, contact Harbor Freight Tools for a
replacement.
Always wear safety impact eye goggles and heavy work gloves when using
2.
the Circular Saw. Using personal safety devices reduce the risk for injury.
Safety impact eye goggles and heavy work gloves are available from Harbor
Freight Tools.
Maintain a safe working environment. Keep the work area well lit. Make sure
3.
there is adequate surrounding workspace. Always keep the work area free of
obstructions, grease, oil, trash, and other debris. Do not use a power tool in areas
near flammable chemicals, dusts, and vapors. Do not use this product in a damp
or wet location.
4.
When using a hand-held power tool, always maintain a firm grip on the tool
with both hands to resist starting torque.
Always keep the extension cord away from moving parts on the tool.
5.
Avoid unintentional starting. Make sure you are prepared to begin work
6.
before turning on the Circular Saw.
7.
Do not force the Circular Saw. This tool will do the work better and safer at
the speed and capacity for which it was designed.
Never leave the Circular Saw unattended when it is plugged into an
8.
electrical outlet. Turn off the tool, and unplug it from its electrical outlet before
leaving.
Always unplug the Circular Saw from its electrical outlet before performing
9.
and inspection, maintenance, or cleaning procedures.
10. Secure work. Use clamps or a vise to hold work. Do not use hands to secure.
SKU 47613
SERVICE
SPECIFIC SAFETY RULES
Page 5
Advertisement
Table of Contents
