Table of Contents
Advertisement
Functions
MODE
The default mode after turning "On" is normal. Press this button to select modes
in this sequence: normal > natural > sleep. The MODE indicator light will illuminate
accordingly. There is no indicator for the normal wind mode.
Normal: The fan runs at a fixed speed for the wind speed selected, without any
change.
Natural: Changing wind speeds (the indicator lights only show the initial wind speed
when the speed changes, and other changes are not indicated).
Sleep: In natural sleep mode, the wind speed LED changes with the 30-minute cycle
change, but does not indicate with the change of natural wind.
High: 30 minutes high speed natural wind > 30 minutes medium level natural
wind > 30 minutes low level natural wind (until turned off).
Medium: 30 minutes medium level natural wind > low level natural wind (until
turned off).
Low: Low level natural wind (until turned off).
COOLER / HUMIDIFIER
Press this button once to turn on the COOLER / HUMIDIFIER function, the pump
will start and the COOLER / HUMIDIFIER LED will illuminate. Press this button again
to turn off the cooling function, and to use as a fan only.
9
Advertisement
Table of Contents
