Advertisement
Using the Ninja
Professional Blender
®
PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN USING THE
APPLIANCE:
WARNING: Never leave the appliance
unattended while in use.
WARNING: Secure the appliance while in use
by pressing down on the lid with one hand.
CAUTION: Stacked Blade Assembly is sharp,
not locked in place and removable, handle
with care. When handling the Stacked Blade
Assembly, always hold by the shaft.
CAUTION: Do not blend hot liquids.
CAUTION: Never remove the container while
the appliance is still running.
IMPORTANT: Never add ingredients into the
pitcher before placing the Stacked Blade
Assembly in first.
IMPORTANT: DO NOT attempt to operate the
appliance without the lid on.
IMPORTANT: Never run the appliance empty.
IMPORTANT: Appliance accessories are not
intended to be used in the microwave as it
may result in damage to the accessories.
5
1-877-646-5288
CAUTION: Stacked
Blade Assembly is
not locked in place
and is removable. If
using the pour spout,
ensure the lid is
fully locked onto the
blender pitcher.
CAUTION: Stacked
Blade Assembly is not
locked in place and is
removable. If pouring
with the lid removed,
ALWAYS remove
the Stacked Blade
Assembly first.
CAUTION: Stacked Blade Assembly is sharp, not
locked in place and removable, handle with care.
When handling the Stacked Blade Assembly,
always hold by the shaft.
BEFORE FIRST USE
1
Remove all packaging material and labels from the
appliance.
2
Wash the lid, pitcher and Stacked Blade Assembly in
warm, soapy water with a soft cloth.
CAUTION: Handle the Stacked Blade Assembly
with care when washing, as the blades are very
sharp.
3
Rinse and dry thoroughly.
4
The pitcher, lid and Stacked Blade Assembly are all
dishwasher safe. It is recommended that the lid and
Stacked Blade Assembly go on the top rack. Ensure
that the Stacked Blade Assembly is removed from the
pitcher before placing in the dishwasher.
5
The motor base can be wiped clean with a damp cloth.
Assembly and Use for the Blender
WARNING: Never leave the appliance unattended while in use.
WARNING: Remove utensils prior to processing.
CAUTION: Handle the Stacked Blade Assembly with care, as the blades are very sharp.
CAUTION: Do not blend hot liquids.
IMPORTANT: Make sure that the motor base is plugged in for use.
ASSEMBLY
Fig. 1
Fig. 2
1
Place the motor base on a clean, dry, level surface.
2
Lower the pitcher onto the motor base. (Fig. 1)
3
Rotate the pitcher to the left as far as it will go. As the
pitcher rotates, it will lower and the safety tabs on the
bottom of the pitcher will slide under the safety tabs on
the top of the motor base. (Fig. 2)
4
The pitcher can be placed on the motor base two ways;
the handle can be on the front right corner or the front
left corner. (Fig. 3a, Fig. 3b)
5
Holding the Stacked Blade Assembly by the shaft, place
it onto the gear shaft inside the pitcher. (Fig. 4) Ensure
that the Stacked Blade Assembly fits around the gear
shaft and that the blade shaft is standing straight.
NOTE: The Stacked Blade Assembly will fit loosely on
the drive gear.
Shaft
Fig. 3a
Fig. 3b
Fig. 4
6
Add the ingredients to the pitcher. Make sure your
total of ingredients don't go higher than the highest
measured marking line on the side of the pitcher.
NOTE: When blending any kind of liquids, such as
mixtures of any drinks or smoothies, do not exceed the
"Max liquid" mark (64 oz.) on the pitcher
7
Plug the power cord into the electrical outlet.
IMPORTANT: As a safety feature, the motor will
not work if the pitcher and lid are not installed
correctly. When the pitcher and lid are installed
properly, the ready light will be solid green,
indicating that the blender is ready for use.
www.ninjakitchen.com
6
Advertisement
