Risk of device damage!
The device is supplied without motor oil.
ATTENTION!
Before operating, you must fill it with motor oil.
Unscrew the tank cap and remove it. (Fig. 8)
– Pour in the fuel carefully. Avoid spilling !
– Screw the tank cap on firmly by hand.
6.4 Filling with engine oil
WARNING! This product is not supplied with oil. However, for
manufacturing reasons it is possible that a small quantity may be left in the
ATTENTION !
1)
Unscrew and remove the oil tank cap.
2)
Gradually add good-quality engine oil. Allow the oil to settle.
3)
Check the oil level frequently while filling. Wipe the oil dipstick clean; refit and tighten the
filler cap and then remove it again. The oil level must be within the min / max markings.
Add more oil if necessary. Do not overfill (Fig. 8).
4)
Wipe spilled oil with a soft cloth and reattach the oil tank cap.
7. OPERATION
Fig.8
oil tank (see "Technical specifications")!
Fig. 9
30
max
min