Advertisement
Quick Links
Congratulations on your purchase of the EasySync USB2-F-7001 or USB2-F-
7101 USB to CANbus adapter. Getting started is quick and easy:
General Installation
Detailed device driver installation instructions, port information and
mechanical details are in the USB2-F-7x01 datasheet. This can be
downloaded from:
http://www.easysync.co.uk/.
To begin, connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB bus,
so no external power supply is required.
Device drivers are needed for the PC to communicate with the USB2-
F-7x01, and can be downloaded from:
or http://www.easysync.co.uk/. To install the drivers , follow the
following steps:
1. Download and unzip the drivers to a folder.
2. Connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-7x01. Power is supplied by the USB
bus, so no external power supply is required.
3. The Windows "Found New Hardware Wizard" will appear. Select
the choices to install the drivers from a specific location, then
browse to the folder just created when the drivers were
downloaded from the EasySync website.
4. If a notice appears indicating that the drivers are not signed,
select "Install Anyway".
© 2009-2010 EasySync Ltd.
Clearance Number
Document Reference Number: ES_000007
USB2-F-7x01_Quick_Start_Guide Version 1.2
USB2-F-7x01 – Quick Start Guide
http://www.easysync-ltd.com/
: ES# 04
or
http://www.easysync-ltd.com/
Advertisement
Related Manuals for EasySync USB2-F-7001
Summary of Contents for EasySync USB2-F-7001
- Page 1 USB2-F-7x01 – Quick Start Guide Congratulations on your purchase of the EasySync USB2-F-7001 or USB2-F- 7101 USB to CANbus adapter. Getting started is quick and easy: General Installation Detailed device driver installation instructions, port information and mechanical details are in the USB2-F-7x01 datasheet. This can be downloaded from: http://www.easysync-ltd.com/...
- Page 2 4 above to complete the installation. CAN Firmware The USB2-F-7x01 comes with EasySync CANbus firmware pre-loaded from the factory. From time-to-time, EasySync will update the firmware and make it available on the web. Updated firmware can be obtained from: http://www.easysync-ltd.com/...
- Page 3 No Connect No Connect Revision History: Version 1.0 2009-02-16 Initial Release Version 1.1 2009-05-22 Minor corrections and hyperlinks corrected. Version 1.2 2010-02-22 Included USB2-F-7101. © 2009-2010 EasySync Ltd. Clearance Number : ES# 04 Document Reference Number: ES_000007 USB2-F-7x01_Quick_Start_Guide Version 1.2...