Download
Share
Print this page
  1. Manuals
  2. Brands
  3. EasySync Manuals
  4. Adapter
  5. USB2-F-6001
  6. Quick start manual

EasySync USB2-F-6001 Quick Start Manual

Hide thumbs
1
2

Advertisement

Quick Links

Download this manual
Congratulations on your purchase of the EasySync USB2-F-6001
adapter. Getting started is quick and easy:
Detailed device driver installation instructions, port information and
Detailed device driver installation instructions, port information and
•
mechanical details are available in the USB2-F-6001
can be downloaded from: www.easysync.co.uk, or
ltd.com.
To begin, connect the USB cable to your PC USB Host or a USB Hub
•
connector and the USB2-F-6001. Power is supplied by the USB bus,
so no external power supply is required.
Device drivers are needed for the PC to communicate with the USB2
•
F-6001. If your computer is connected to the Internet, you can use
If your computer is connected to the Internet, you can use
the Microsoft Windows Update service to automatically download
the Microsoft Windows Update service to automatically download
the latest WHQL-certified device drivers. Alternatively these can be
downloaded from: www.easysync.co.uk, or
To install the drivers , follow the following steps:
1. Download and unzip the drivers to a folder.
2. Connect the USB cable to your PC USB Host or a USB
Connect the USB cable to your PC USB Host or a USB Hub
connector and the USB2-F-6001. Power is supplied by the USB
bus, so no external power supply is required.
3. The Windows "Found New Hardware Wizard" will appear. Select
The Windows "Found New Hardware Wizard" will appear. Select
the choice to install the drivers from a specific location, then
the choice to install the drivers from a specific location, then
browse to the folder just created when the drivers were
downloaded from the EasySync website.
4. If a notice appears indicating that the drivers are not signed,
If a notice appears indicating that the drivers are not signed,
select "Install Anyway".
© 2009 EasySync Ltd.
Clearance Number : ES #07
Document Reference Number: ES_000016
USB2-F-6001_Quick_Start_Guide (ES_000016) Version 1.0
USB2-F-6001 – Quick Start Guide
onnect the USB cable to your PC USB Host or a USB Hub
folder just created when the drivers were

Quick Start Guide

. Power is supplied by the USB bus,
Alternatively these can be
www.easysync
www.easysync-ltd.com.
. Power is supplied by the USB
001 USB to RS422
001 datasheet. This
www.easysync-
www.easysync
cate with the USB2-

Advertisement

loading

Related Manuals for EasySync USB2-F-6001

Summary of Contents for EasySync USB2-F-6001

  • Page 1: Quick Start Guide

    USB cable to your PC USB Host or a USB Hub • connector and the USB2-F-6001. Power is supplied by the USB bus, . Power is supplied by the USB bus, so no external power supply is required.
  • Page 2 USB2-F-6001 – Quick Start Guide Quick Start Guide 5. The Driver wizard will appear a second time. Repeat the steps The Driver wizard will appear a second time. Repeat the steps 2 to 4 above to complete the installation. The DE-9P pin-out is as follows:...