Configure Beo4 For Use With Another - Bang & Olufsen Beo4 Manual

14
Downloaded from
>> Customise Beo4 ...
Configure Beo4 for use with another audio
or video system
Your Beo4 is configured for VIDEO4 from the
factory, but you can configure Beo4 for use
with any type of Bang & Olufsen audio or
video system.
To be able to reconfigure Beo4 ...
> Press and hold the standby button down.
> Press LIST to get access to the Beo4 setup
function.
> Let go of both buttons. ADD? appears in the
display.
> Press LIST repeatedly to display CONFIG? on
Beo4.
> Press GO to be able to select the type of
configuration – video or audio.
> Press LIST until VIDEO? or AUDIO? appears in
the display.
> Press GO to get access to video or audio
configurations.
> Press LIST until the configuration you want
appears in the display.
Or, press any of the control buttons,
list of available configurations.
> Press GO to store the configuration shown in
the display.
When STORED appears in the display, the
configuration has been changed and you then
leave the Beo4 setup automatically ...
ManualsNet.com
or to move forwards or backwards in the
search engine
, ,