Philips Sonicare AirFloss HX8211/02 Manual page 10

ENGLISH
10
3 Fill the reservoir with mouthwash or water (Fig. 7).
Note: To operate effectively, the AirFloss has to contain either mouthwash or water.
Tip: For a fresher experience, use mouthwash instead of water.
Note: Do not use mouthwash that contains isopropyl myristate
(e.g. Dentyl Active) or high concentrations of essentials oils, as it may damage
the appliance. This includes all mouthwash sold in glass and ceramic packaging.
4 Close the cover of the reservoir ('click') (Fig. 8).
5 Press the on/off button (Fig. 9).
The green charge indicator lights up.
,
6 Press and hold the activation button until spray comes out of
the tip of the nozzle (Fig. 10).
1 Make sure the AirFloss is switched on (Fig. 9).
2 Place the tip between the teeth and apply gentle pressure.
Slightly close your lips over the nozzle when it is in place,
to avoid splashing (Fig. 11).
Note: The AirFloss is intended to be used on the front/outside surface of
the teeth only.
3 Press the activation button to deliver a single burst of air and micro-
droplets of mouthwash or water between the teeth. Alternatively,
hold the activation button to deliver continuous bursts of mouthwash
or water approximately every 1 second (select models) (Fig. 12).
4 Slide the guidance tip along the gum line until you feel it settle
between the next two teeth.
5 Continue this procedure for all spaces including behind your
back teeth (Fig. 13).
6 To switch off the AirFloss, press the on/off button again.