Using The Tv; Using The Remote Control; Turning The Tv On And Off; Selecting Channels - HANNspree HANNSrobby HANNSrobby User Manual

9

Using the TV

Using the Remote Control

For best results, use the remote control within a distance of 16 feet
(5 meters) from the front of the TV. Do not exceed an angle of 30 degrees
when pointing at the TV.
Notes
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and
ensure that there are no obstacles between them.

Turning the TV On and Off

1
Press power
TV.
2
Press power

Selecting Channels

Press channel up or channel down on the control panel to select the
channel or enter the specific channel number by pressing the number
buttons on the remote control.

Switching Source Signals

Press source to select the incoming source signal.
The current source setting (TV/CATV, AV or S-Video) appears on the upper
left corner of the screen.

Adjusting the Volume

Press volume up to increase the volume. Press volume down to decrease
the volume. The volume level is displayed on the screen.
30
on the remote control or control panel to turn on the
again; the TV is in off mode.