EINHELL TC-SM 2531/2 U Original Operating Instructions page 49

Never place any electric power tools in your household refuse.
Old electric and electronic equipment and old electric power tools have to be separated from other was-
te and disposed of in an environment-friendly fashion, e.g. by taking to a recycling depot, according to
the local legal requirements.
The reprinting or reproduction by any other means, in whole or in part, of documentation and papers ac-
companying products is permitted only with the express consent of the www.einhell-service.com.
Subject to technical changes without prior notice.
•
The product meets the requirements of EN 61000-3-11 and is subject to special connection condi-
tions. This means that use of the product at any freely selectable connection point is not allowed.
•
Given unfavorable conditions in the power supply the product can cause the voltage to fluctuate
temporarily.
•
The product is intended solely for use at connection points that
a) do not exceed a maximum permitted mains system impedance of Z sys = 0,25 + j 0,25 Ω, or
b) have a continuous current-carrying capacity of the mains of at least 100 A per phase.
•
As the user, you are required to ensure, in consultation with your electric power company if neces-
sary, that the connection point at which you wish to operate the product meets one of the two requi-
rements, a) or b), named above.
Anl_TC_SM_2531_2_U_SPK8.indb 49 Anl_TC_SM_2531_2_U_SPK8.indb 49
GB
- 49 -
30.06.2021 08:18:59 30.06.2021 08:18:59