To Use The Menus; Picture Menu - Haier LT19A1 User Manual

the remote, side of the HDTV or directly
by pressing the PC button on the Remote.
NOTE
 For the best picture quality when
connecting a computer through VGA, set
your computer timing mode to native
resolution of panel. Please refer to the PC
or graphic card's user guide for additional
information on how to set the timing
mode and the video output requirements
of the product.

TO USE THE MENUS

1. Press the MENU/EXIT button to display
or close the main menu
2. Use the Navigation Ring to move around
to select, adjust or confirm an item in the
OSD (On Screen Display) menu.
Press the MENU/EXIT button to enter the
main OSD. Adjust the items including Picture,
Sound, TV, Features, and Parental.
However, some function items in the menus
may only be enabled in the particular source
modes.

PICTURE MENU

The Picture menu in most source modes
shows as below. It provides several video
adjustment items for user fine tuning the video
display.
Picture
Smart Picture
Brightness
Sound
Contrast
TV
Colour
Tint
Features
Sharpness
Parental
Colour Temperature
Advanced Control
Enter
OK
1. Smart Picture: To set the best picture
appearance to a predefined picture
Standard
45
50
60
0
5
Cool
Select Exit
EXIT
setting from Standard, Vivid, Movie, Eco, or
Personal.
2. Brightness: To brighten the dark parts of
the picture.
3. Contrast: To sharpen the picture quality.
4. Colour: To add or reduce colour.
5. Tint: To adjust the picture tint.
6. Sharpness: To improve detail.
7. Colour Temperature: To choose
between Normal (neutral), Warm (redder),
and Cool (bluer).
8. Advanced Control:
[Noise Reduction] - To filter out and
reduces the image noise and improve
picture quality. Select the effect degrees
from Off, Low, Medium, High, or Auto.
[Flash Tone] - To adjust the skin colour
to be more natural.
[Back Light] - To make the background
colour brighter or darker.
[DCR] - Dynamic Contrast Ratio (DCR)
auto adjusts the brightness of the screen
to show more depths in the darker areas.
[HDMI Mode] - (HDMI only) User
can select Auto/graphic/Video mode.
Description as following:
• Auto: Automatic to get device
information, device will indicate sending
timing is video timing or graphic timing
(PC timing).
• Graphic: Force video timing shows
as graphic timing, for example: 720p
shows 1280x720@60Hz; 1080i shows
1920x1080@60Hz. This mode optimises
for PC input.
• Video: Force graphic timing shows
as video timing, for example:
1280x720@60Hz shows 720p;
1920x1080@60Hz shows 1080i.
This mode optimises for DVD player,
camcorder, and other video appliances
inputs.
19