AT288N User guide AT288N UI guide AT288N UI guide Corp. Atid Co., Ltd. Document Ui guide Writer Won-Tak Choi Date 2016-05-25 Version v0.3 Contents Description for Main Function ............................ 5 Protocol ..................................5 Remote control ..............................5 RF Power Control ..............................6 Beep ....................................
Page 4
AT288N User guide AT288N UI guide AT288N UI guide Corp. Atid Co., Ltd. Document Ui guide Writer Won-Tak Choi Date 2016-05-25 Version v0.3 BT LED..................................9 USB LED ................................. 10 Button ....................................10 Power Key ................................10 C Key ..................................11 RF Power Control Left Key ..........................
6B is not available at present. It will be supporting in the near future. Remote control AT288N can be used by both Bluetooth and USB. For the detailed information, Bluetooth Protocol can be set up among SPP, HID and BLE (To be supported). Also USB protocol can be set up by either VCP or HID.
AT288N User guide AT288N UI guide AT288N UI guide Corp. Atid Co., Ltd. Document Ui guide Writer Won-Tak Choi Date 2016-05-25 Version v0.3 The connection can be available using Serial Profile Protocol and the data to be read will be uploaded to Serial Port (COM Port) of upper level device. Upper level device...
AT288N User guide AT288N UI guide AT288N UI guide Corp. Atid Co., Ltd. Document Ui guide Writer Won-Tak Choi Date 2016-05-25 Version v0.3 Output Format Serial number Serial number will be shown in front of the tag RFID Inventory Option Selection Mask Neither random tag only inventories or all tags except for random tags inventory.
Version v0.3 2 LED Changing LED state will let user know on setting and event of AT288N One / Multi LED In state of One tag mode in Inventory Mode, ONE LED will be turned on and in state of Multi tag mode in inventory mode, Multi LED will be turned on. in state of Unique tag mode, both One and Multi tag mode will be turned on.
USB LED is always on 3 Button There are two ways of maneuvering buttons in AT288N; Long press & Shot press. For Short presses, it is recognized and operates when the buttons is released. For Long presses, it is recognized and operates when the button is pressed for more than 2 seconds.
C Key There are two functions for C key. For AT288 users, please note the key functions differently in AT288N since AT288N only supports 6C. Short Press When C Key is pressed, different Inventory Mode can be selected. One Tag mode-> Multi Tag mode-> Unique Tag mode Long Press Long press would enable or disable the Beep Mode.
AT288N User guide AT288N UI guide AT288N UI guide Corp. Atid Co., Ltd. Document Ui guide Writer Won-Tak Choi Date 2016-05-25 Version v0.3 Long press (To be supported later) Run in UHF Update Mode. In this mode, the firmware of UHF Sensor can be updated.
Need help?
Do you have a question about the AT288N and is the answer not in the manual?
Questions and answers