Advertisement
ATTACH TOP SHELF
TO LEGS
STEP 1: Place top wood shelf with metal
support "H" upside down on a smooth,
level surface.
NOTE: The Top shelf is the larger of the two shelves.
STEP 2: Place one x-leg inside of top
frame as shown.
STEP 3: Insert 2 bolts "B" through holes
in top and leg and secure each with lock
washer "C" and nut "D".
NOTE: Leave nuts slightly loose at this time so the
stand can be leveled later.
STEP 4: Repeat above steps for
attaching x-leg on other side.
TOOL
REQUIRED
Wrench (supplied)
B
ATTACH BOTTOM
SHELF TO LEGS
STEP 5: Position bottom wood shelf with metal support as shown here
making sure cross brace holes are located on the same side as noted. Attach bottom shelf
support to inside of legs using 4 bolts "B". Secure with lock washers "C" and nuts "D".
NOTE: Leave nuts slightly loose at this time so the stand can be leveled later.
B
C
D
Bottom Wood Shelf
I
with Metal Support
C
D
B
C
D
3
B
C
D
Top Wood Shelf with
H
Metal Support
Make sure this hole is located on same
side as the two holes located on the
side of the top shelf assembly before
attaching bottom shelf.
D
D
C
G
C
B
B
Advertisement
