Download Print this page

Marco X-Series Assembly Instructions page 2

Aquarium stands

Advertisement

IMPORTANT SAFETY INFORMATION
Please read all the following information before assembling and using
your aquarium stand.
THIS PRODUCT IS NOT A TOY – NEVER allow small children to touch, climb
on or play with aquarium or aquarium stand. Serious injury or death could
result.
WHERE TO PLACE YOUR AQUARIUM
Use only an aquarium stand designed to support the weight and size of your
aquarium. The filled weight of an aquarium is approximately 10 to 12 pounds
per gallon. This stand is designed only for use on level surfaces. Failure to
place your stand on a level surface could cause the aquarium to leak, crack or
even tip or fall. Never tip the stand from the upright position.
MOVING YOUR AQUARIUM STAND
Always position the stand in the desired location before putting the
aquarium tank in place. Never attempt to move the stand with the aquarium
in place. Never remove an aquarium tank from the stand unless the aquarium
tank is completely empty. Never carry the stand by the top.
BEFORE BEGINNING ASSEMBLY:
Please review the Parts List to ensure you have all the parts
shown here. If you find missing or broken parts, or are in need
of assembly guidance, call toll free, 1-888-627-2601 and we'll
be happy to help.
PLEASE DO NOT RETURN THIS MERCHANDISE TO THE STORE.
HARDWARE PACK
A
¼-20 x ¾" Bolt (
B
¼-20 x 1 ½" Bolt (
C
¼-20 Lock Washer (
D
¼-20 Hex Nut (
E
Wrench (
1)
x
3)
x
8)
x
11)
x
11)
x
LIMITED WARRANTY
This aquarium stand is under warranty by Marco Group, Inc. against defects
in material and workmanship for 90 days from the date of purchase. If any
component of the stand is found to be defective, you may contact us for
replacement provided that it has not been modified, damaged or misused.
(Proof of date of purchase must be provided).
THIS WARRANTY IS VOID if the aquarium stand is modified, if it is not placed on
a flat, level surface, if it is used with a tank other than it is designed, if it is moved
with the tank in place or if it is used for other than it's intended purpose.
This warranty is limited to replacement of the stand only. Warranty does not
cover loss of fish, personal injury, property loss or damage arising out of use
of the aquarium stand. Some states do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives you specific rights and you may have other
rights that vary from state to state.
CARE & MAINTENANCE
• Clean furniture with a soft cotton cloth moistened with water.
• DO NOT use abrasives.
• DO NOT leave water on any of the stand's surfaces. Always
wipe spilled water from the stand. Water, for prolonged
periods, could damage the stand's surface.
PARTS LIST
F
X Leg (x2)
H
Top Wood Shelf with
Metal Support Assembly (x1)
Note: Shelf support will vary depending on size of stand.
I
Bottom Wood Shelf with
Metal Support Assembly (x1)
Note: Shelf support will vary depending on size of stand.
2
G
Brace (x2)

Advertisement

loading

This manual is also suitable for:

5x10-15x20-15x29-15x55-1