Page 3
Reproduction of contents, in whole or part of this manual, without written permission from CIMON Inc. is prohibited. Safety symbols are classified into two categories: “WARNING” and “CAUTION”. Warning: This symbol describes situations that could cause major or fatal injury to the user.
Page 4
Design Precautions ( Warning) Please install a safety circuit to protect the entire control system in case of an unexpected power shutdown or PLC module malfunction. Such anomalies may severely compromise the integrity of the overall system. External to the PLC, please install circuits and switches to safeguard the system from mechanical damages (ex.
Page 5
Precautions for mounting ( Caution) Use the PLC in an environment that meets the general specifications given in this manual. Using this PLC in any environment outside the range of the general specifications could result in electric shock, fire, malfunction, or damage to or deterioration of the product. Please ensure that each module is installed correctly in its place.
Page 6
Precautions for test run and repair ( Warning) Please do not touch the terminals when the power is on. Doing so could cause an electric shock or malfunctions. When cleaning or tightening the screws, turn off the power of the PLC and all other systems. Failure to do so could cause an electric shock or malfunctions.
The module number is counted continually from the previous base. Recommendations on using USB Cable ▶ 1. Recommended to use CIMON’s shielded cable within 3m length. 2. In case of using PC that is vulnerable to noises, it is recommended to use a USB Hub or Isolator...
Page 10
Expansion Configuration ▶ After connection from Local Base to Expansion Base, select the number of bases in the sequence. < EP0nA Module > < EP02F/G Module with XP1S, XPnF, UPnF CPU > No. of Bases Rotary Switch No. of Bases Rotary Switch Rotary Switch Exp No.
Page 11
Expansion Configuration ▶ Slot number of “FROM” and “TO” command • Slot number starts from 0. • Format: h + [Base No.] + [Slot No.] h: Hexadecimal number Base No: Hexadecimal number 2 Characters Slot No: Hexadecimal number 2 Characters •...
CIMON. In no event will CIMON be liable, whether in contract, tort or under any other legal theory, for lost profits or revenues, loss of use or similar economic loss, for any indirect, special,...
Page 15
INTELLECTUAL PROPERTY RIGHTS, OR THE ACCURACY, RELIABILITY, QUALITY OR CONTENT IN OR LINKED TO THE PRODUCTS. CIMON AND ITS AFFILIATES AND SUPPLIERS DO NOT WARRANT THAT THE PRODUCTS ARE SECURE, FREE FROM BUGS, VIRUSES, INTERRUPTION, ERRORS, THEFT OR DESTRUCTION. FURTHER, CIMON DOES NOT WARRANT ACCESS TO THE INTERNET OR TO ANY OTHER SERVICE, CONTENT OR DATA TRANSMITTED THROUGH THE PRODUCTS.
Page 16
REGULATIONS. LIMITATION OF LIABILITY AND INDEMNITY: TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE ENTIRE LIABILITY OF CIMON, AND ITS AFFILIATES AND SUPPLIERS FOR ALL MATTERS OR CLAIMS RELATING TO THIS AGREEMENT SHALL BE LIMITED TO THE AMOUNT YOU PAID FOR THE PRODUCTS DURING THE TWELVE (12) MONTHS PRIOR TO SUCH CLAIM.
Need help?
Do you have a question about the CM1-EP01A and is the answer not in the manual?
Questions and answers