Panasonic H-PS45175PP Service Manual page 13

7. Insert the L MOUNT UNIT into the Lens Body, then ft the MOUNT CONTACT UNIT into place.
8. Set SHADING FLAME UNIT on L MOUNT UNIT, then tighten the 3 screws in the order as shown in the fgure by using the torque
driver with specifed torque.
(Torque: 10 +/- 1.2N-cm)
9. Tighten 3 screws in the order as shown in the fgure by using the torque driver with specifed torque, then tighten a screw
connecting L MOUNT UNIT and MOUNT CONTACT UNIT in the same way.
(Torque: B204 to B206: 20 +/- 1.2N-cm, B207: 8 +/- 1N-cm)
file:///C|/U...l/Temp/Rar$EXa0.980/viewing/SGML_VIEW_DATA/ALL/H-PS45175PP/SVC/DSC1109054CE/doc/DSC1109054CE_04.xml[11/12/2018 4:02:41 PM]