Table of Contents
Advertisement
2. Tighten the 3 screws by using the torque driver with specifed torque.
(Torque: 7 +/- 1.2N-cm)
3. Attach FILTER RING UNIT on the Lens Body to set the mark of the two in the same direction.
4. Tighten the 3 screws in the order as shown in the fgure by using the torque driver with specifed torque.
(Torque: 10 +/- 1.2N-cm)
5. Install DECO.RING by referring the Phase marks.
file:///C|/U...l/Temp/Rar$EXa0.980/viewing/SGML_VIEW_DATA/ALL/H-PS45175PP/SVC/DSC1109054CE/doc/DSC1109054CE_05.xml[11/12/2018 4:04:07 PM]
Advertisement
Table of Contents
