Table of Contents
Advertisement
4.3. DRX CONFIGURATION
Connect the WSP-038 and Satellite Compass to the DRX as per
diagrams" on page 6.
RS422-A
RS422-B
LAN
POWER
N2K
0183
Figure 4. S3/F3/F3X WSP-038 Connections
For sensor configuration on the DRX refer to the DRX Installation Manual.
DRX SETUP WEBPAGES.
Configure the DRX using the
Using the WSP-038
PRESET
the sensor setup can be automated for
SETUP, CORRECTIONS AND
PPS.
Sensor offsets will need to be input manually using the
Sensor biases (angular offsets) will need to be input manually using the
CONFIGURATION
page or using appropriate automated path tests.
Refer to the DRX Installation Manual for full details.
wassp.com
Page 12 of 24
WSP-038 IMU INSTALLATION MANUAL
"1 Interconnection
Satellite Compass
RS232
WSP-038
AUX
PORT SETUP, DATA
SENSOR
configuration page.
DATA SETUP
Doc: WSP-038 IMU INSTALLATION MANUAL
Version: 1.4 December 2019
WSP-038 IMU INSTALLATION MANUAL
4.3.1. Configuring for WSP-038 with Furuno SC
1.
With the system fully connected with all sensors powered on open the
WEBPAGES.
2.
Select
CONFIGURATION
and open the
AVAILABLE PRESETS
3.
Under
SC WITH WSP-038
select
and
select
LOAD.
4.
Setup the sensor offsets
SENSOR
under the
tab,
following the instructions in
the DRX Installation Manual.
5.
Setup the Sensor Biases
under the
DATA SETUP
tab,
following the instructions in
the DRX Installation Manual.
wassp.com
Doc: WSP-038 IMU INSTALLATION MANUAL
Version: 1.4 December 2019
DRX SETUP
PRESETS
tab.
Page 13 of 24
Advertisement
Table of Contents
