SAFETY PRECAUTIONS WARNINGS To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER. NO USER SERVICEABLE PARTS INSIDE.
• Leave the product in a warm, dry room for 1 to 2 hours to allow the condensation to evaporate. In the event of a problem, unplug the power cord and contact Grundig Helpline: 1800 509 394 Australia. Grundig Helpline: 0800 450 259 New Zealand...
LOCATION OF CONTROLS TIMER SKIP/SEARCH BACKWORD PLAY/PAUSE SKIP/SEARCH FORWARD REPEAT SOCKET AC MAINS CAUTION: Usage of controls, adjustments, performance or procedures other than those specified herein may result in hazardous radiation exposure. This unit should not be adjusted or repaired by anyone except a qualified service person.
REMOTE CONTROL HANDSET 1. MUTE: Press to activate/de-activate MUTE function. 2. STANDARD: Press to turn power On or Off. 3. FUNCTION: Press to select the system for CD/TUNER /iPod or CARD-USB. 4. BAND: Press to select TUNER mode or to select BAND (FM or MW).
CLOCK TIMER & SLEEP Swith the unit to standby mode. Press and hold the MEMORY/CLOCK button more than 1 second. Press HOUR or 12 HOUR.Press MEMORY/CLOCK button to store. Press to set the hours. Press MEMORY/CLOCK button to store. Press to set the minutes.
LISTENING TO THE RADIO MANUAL TUNING 1. Press button to select desired BAND (MW or FM). BAND 2. Tune to the required station by pressing the 3. Adujst volume control to the desired volume level. AUTO TUNING Press button to select desired band (MW or FM). BAND Press and hold the The unit will start scanning automatically and stops when a radio station is reached.
WARNING! THIS PRODUCT USES A CLASS 1 LASER. AVOID ANY DIRECT EXPOSURE TO THE LASER BEAM. USE OF CONTROLS, ADJUSTMENTS OR PROCEDURES NOT LISTED IN THIS GUIDE MAY RESULT IN HAZARDOUS EXPO- SURE. HANDLING COMPACT DISCS To remove a CD from its storage case, press down on the centre of the case and lift the disc out. Hold the disc by the edges.
Page 11
CD PLAYER PROGRAMMDE TRACK SELECTION You can set your CD Player to play a preset selection of tracks. TO PROGRAM SPECIFIC TRACKS: Press the so the CD is not playing then press the MEMORY button. The LCD display will show 00 P--01. The first two dig its 00 are where the selected track number is entered, P--01 is the program counter which will increment after a track is entered.
CD PLAYER TO SET INTRO PLAY DURING PLAY OR STOP MODE: In this mode the CD player will play the first 10 seconds of each track on the CD, then stop playing . Press the INTRO button until the LCD display shows ‘INTO’. The first 10 seconds of each track will then play. 2.
SOUND CONTROL MUTE FUNCTION To mute the sound, press the MUTE button, "MUTE" will flash on the LCD display. Press the MUTE button again to restore the sound. PRESET EQ FUNCTION The unit has 5 preset equalizer. The presets are PASS, CLASIC, ROCK, POP and JAZZ. The equalizers enhance certain frequency groups to suit the type of audio output.
USING THE USB AND SD/MMC CARD USB PORT USB Devices such as USB (memory sticks) Flash Drives and MP3 players containing MP3 files can be connected to the USB PORT. INSTALLING A USB DEVICE Ensure the USB device is switched on, before connecting. Remove SD/MMC card from the card slot then connect the USB device to the USB PORT.
MAINTENANCE CARE OF THE COMPACT DISC • To remove a disc from its storage case, press down on the center of the case and lift the disc out, holding it carefully by the edges. • Fingerprints and dust should be carefully wiped off the disc’s recorded surface with a soft cloth. Unlike conventional records, compact discs have no grooves to collect dust and microscopic debris.
If a fault occurs, first check the points listed below before taking the set for repair. Do not open the set as there is a risk of electric shock. If you are unable to remedy the problem by following these hints, call Grundig Helpline: 1800 509 394 Australia Grundig Helpline: 0800 450 259 New Zealand.
GENERAL Power Supply: Power consumption: Dimensions of unit: Frequency range: Antenna: Remote Control: COMPACT DISC Disc Drive Laser Type Disc Compatibility Laser output Wave length SPEAKER SYSTEM Speaker MP3 PLAYER Format: Bitrate: Sampling Rate: SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE SPECIFICATIONS AC230V~50Hz , 240V~60Hz...
Page 18
If guarantee is required please contact the Grundig Helpline 1800 509 394 within Australia or the 0800 450 259 within New Zealand. Have your receipt of purchase on hand.
Need help?
Do you have a question about the CDS2500IP and is the answer not in the manual?
Questions and answers