Set Up The System - NormaTec 2.0 Pro Operating Instructions Manual

Normatec 2.0 Pro Arm Attachment (single-person use only)
Normatec 2.0 Pro Hip Attachment (single-person use only)
Normatec 2.0 Pro Power Supply
OPERATING INSTRUCTIONS
WARNING! BEFORE OPERATING THIS CONTROL UNIT: Read all warnings at the beginning of this manual. If you do
not understand these operating instructions, contact Hyperice at +1.949.565.4994.

SET UP THE SYSTEM

• Step 1: Plug the power supply into an electrical outlet and then into the Normatec 2.0 Pro control unit.
This control unit is equipped with a lithium ion battery. The battery automatically charges when the power supply
is connected to the Normatec 2.0 Pro control unit and an electrical outlet.
1. Attachment connector
2. Zones
1. Attachment connectors
2. Zones
1. Wall outlet plug
2. Barrel connector