Jumper Setting & Opening Of The Case; Fig. 7.1: Cspa1X Board With Jumpers; Fig. 7.2: Cspa1X Board With Connectors - FAST ComTec CSPA10 User Manual

7 Jumper setting & opening of the case
JP2 * 1-2 shorted - protection network active,
JP3 * 1-2 shorted – inp. ser. resistor = 0 Ohm
JP9 * 1-2 shorted – output resistor = 1 Ohm
* marked default setting
ComTec GmbH
F
Jumper setting & opening of the case

Fig. 7.1: CSPA1X board with jumpers

2-3 inp. ser. resistor = 100 Ohm
2-3 output resistor = 50 Ohm

Fig. 7.2: CSPA1X board with connectors

2-3 protection passive
17