Summary of Contents for EZ Goal MONSTER SPORTS PRO Series
Page 1
6'x6' Heavy Duty O cial Regulation Folding Metal Lacrosse Goal with Backstop DO NOT RETURN PRODUCT TO THE STORE Missing parts, need replacements, or help with assembly Please contact Customer service: service@ezgoal.net (+1) 203-591-9032 Waterbury, CT 06710 U.S.A. 03-85572 re v. 2017-08-15 Page 1...
Page 2
Note Precision Connections will fit snugly. Use a rubber mallet or block of wood if needed Follow the diagrams Connect the folding section and base parts together Part 1203 to parts1204L and 1204R The folding section bolts should be on the inside and in front The nut should be on the outside Do not over tighten the nuts The pull pins should be in the back of the folding section Make sure the big slot...
Page 3
Patented folding system and Backstop Patent pending Backstop front closing system US. # 6,849,009 6,558,279 6,652,395 Can. # 2,313,845 2496251 2496251 3096251 3096251 3096251 Middle Inside Upright 3096251 Bolts 8 mm x 3" B875 Eye Bolts 8 mm x 30 mm E830 8 mm 9142...
Page 4
Monster 6’ x 6’ Lacrosse Backstop Kit Note: 2496251 2496251 Use a rubber mallet or block of wood if needed. Figure 1. Assemble Side Panels Note: according to the diagram. The corner loops on each panel should face each other and the down tube loops face back.
Page 5
Figure 5 Figure 5. Folding and Storage for Indoors Note: This Backstop is designed to fold up infront of the goal. To do this you need to nd the button on the bottom back upright of the Monster goal. Press the button in, which will enable the ring on the goal to rotate to the front of the goal with the backstop.
Need help?
Do you have a question about the MONSTER SPORTS PRO Series and is the answer not in the manual?
Questions and answers