Summary of Contents for EZ Goal MONSTER SPORTS PRO Series
Page 1
#85568 8’X6’ PROFESSIONAL FOLDING LACROSSE THROWBACK Illustration Description Part # Qty. 3812668 Left top bend tube Right top bend tube 3812668 Bottom tube with slots 3812668 INSTALLATION INSTRUCTIONS Straight tube 1218 Please read instructions 1219 Bottom tube COMPLETELY before assembly. Left bottom frame of throwback 3812668 section...
Page 2
FRAME ASSEMBLY TWO PEOPLE ARE RECOMMENDED FOR ASSEMBLY NOTE: Precision connections will fit snugly. Use a rubber mallet or block of wood if needed. 1. Connect the folding section and base parts together using these parts: 1503, 103, 107 and 1219. Refer to Figure A and make sure part 103 has the longer slot on top.
Page 3
ADJUSTING THE ANGLE OF THE Adjusting Throwback Side Tilting Section THROWBACK FRAME 2. Twist Right 3. Tilt Throwback 4. Twist Left The throwback Side Tilting Section has a special patent pending feature that enables you to adjust the throwback without going from hole to hole.
Page 4
Folding Steps FOLDING INSTRUCTIONS TWO PEOPLE ARE RECOMMENDED FOR FOLDING AND OPENING THE THROWBACK 1. Unhook the 9 bottom bungees 2. Lay the Main Frame on the ground facing down. Take the Pull Pins out of the Side Tilting Section from the base. (Figure A) Fold the base away from the main frame (Figure B) Shorten the Side Tilting and secure in to...
Page 5
BACKSTOP REBOUNDER KIT FITS ALL GOALS AND REBOUNDERS 03-85568 2017-08-21 Page 5...
Need help?
Do you have a question about the MONSTER SPORTS PRO Series and is the answer not in the manual?
Questions and answers