Advertisement
Disposing of the Battery
Before disposing the battery, make sure:
• The machine is disconnected from the docking station.
• The clean and dirty water tanks are empty or removed from the machine.
1.
Remove the Clean Water Tank
and the Dirty Water Tank.
4.
Remove two screws under the front
face of the machine body. Remove 11
screws that attach the front cover to
the body of the product.
7.
Unplug the yellow connector
from the body of the product.
10.
Remove the battery pack from
the product.
2.
On the back of the machine, press
the button under where the handle
fits into the machine, while pulling
the handle up.
5.
Use a screwdriver to remove
the 3 screws holding the battery in
place. Remove the battery pack.
8.
Unplug the orange connector
from the body of the product.
11.
After the connectors are
disconnected from the body of the
product.
©2022 BISSELL Inc. All rights reserved. Part Number 1627863 11/21 RevB
Needed for Disassembly:
• Phillips-head Screwdriver
• Electrical tape
3.
Remove the product face
with a screwdriver by sliding a
screwdriver between the face and
the body of the product.
6.
The front cover and the body of
the product are attached by three
connectors.
9.
Unplug the red and black wired
connector.
12.
Use electrical tape to tape the
end of the connectors and recycle
the battery.
Advertisement
