Page 3
Turn on the Bluetooth of your phone and search for the Ÿ Bluetooth name “Boult Audio TrueBuds” to pair. Tips: When the earbuds are ready to pair with your Bluetooth device the indicator lights on the left earbud ashes in red and blue alternately, while the right earbud ashes slowly.
Functional operation Play /Pause Double-click Previous Song Press 2s (Left earbud) Next Song Press 2s (Right earbud) Answer Call/Hang up Double-click Reject Call Press 1s Triple-click Voice Assistant a) Take out of the charging case Power On b) Long Press earbuds for 2s a) Put the earbuds in the charging case for charging b) Long press earbud for 5s...
Page 5
Charging Charging for the charging case When charging, the indicator light ashes white light. Ÿ When fully charged, the 4 white indicator lights keep lighting, Ÿ please disconnect charging devices from the charging case. Charging for earbuds When charging, the indicator light ashes red light. Ÿ...
Page 6
Take out the earbuds from the charging case, and touch the left and right earbud 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name “Boult Audio Truebuds” to pair. 2. If the left and right earbuds cannot connect normally...
Page 8
Attention Do not remove or re t earbuds for any reason, otherwise it will lead to earbud damaged and burn. These are not covered by warranty. Do not touch the earbuds in corrosive liquid, otherwise it will cause serious damage. The manufacturer will not guarantee the damage caused under this situation.