1. Connecting to Earbuds First time Setup: Take earbuds out from the case, the earbuds will automatically turn on. Turn your device Bluetooth on. Search for “Boult Audio Gearpods” and select to connect. Boult Audio Gearpods Regular use : Once next use, the earbuds will automatically connect with a preconnected device.
3. Power On & Off Power-On Remove the earbuds from the case, they will automatically turn Ÿ on and pair with each other. Long press the touch control area on both earbuds at the same Ÿ time for 2 seconds, then the earbuds will turn on and pair with each other.
Charging the Case Plug the charging case into 5V/1A adapter with a Type-C cable (include in the package). The charging light will ash white when charging. When full the white light will stay on and the case should be disconnected from the power source. 5.
Page 7
Take out the earbuds from the charging case, and touch the left and right earbud 5 times, it will clear the record of the Bluetooth device. Then search for the Bluetooth name “ Boult Audio Gearpods” to pair. Boult Audio Gearpods...
Trouble Shooting P: The earbuds don’t pair with each other? A: Place the earbuds into case for charging a few seconds. take them out of the case and try to connect again. P: The earbuds don’t charge when place into the case. A: Check to see if the charging case light will turn on when earbuds are placed inside.
Need help?
Do you have a question about the PROBASS GEARPODS and is the answer not in the manual?
Questions and answers