Table of Contents
Advertisement
Skin Injection Hazard
Use with high pressure equipment, generally equipment with pressure rating of 900 psi or higher. There
Warnings
sions of this section. 1) manual guns, 2) UL-1450 compliant equipment 3) automatic guns,/dispense val
tion valves, 4) heated hoses. Since the text contains mostly "Do not" statements, the symbols have lines
them.
SKIN INJECTION HAZARD
SKIN INJECTION HAZARD
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may look
High-pressure fluid from gun, hose leaks, or ruptured components will pierce skin. This may l
like just a cut, but it is a serious injury that can result in amputation. Get immediate surgical
a cut, but it is a serious injury that can result in amputation. Get immediate surgical treatm
treatment.
•
Do not point gun at anyone or at any part of the body.
•
Do not point gun at anyone or at any part of the body.
•
Do not put your hand over the spray tip.
•
Do not put your hand over the dispense outlet.
•
Do not stop or deflect leaks with your hand, body, glove, or rag.
•
Do not stop or deflect leaks with your hand, body, glove, or rag.
•
Engage trigger lock when not spraying.
•
Do not spray without tip guard and trigger guard installed.
•
Follow Pressure Relief Procedure in this manual, when you stop spraying and before cleaning,
•
Engage trigger lock when not spraying.
checking, or servicing equipment.
•
Follow Pressure Relief Procedure in this manual, when you stop spraying and before c
checking, or servicing equipment.
EQUIPMENT MISUSE HAZARD
SKIN INJECTION HAZARD
Misuse can cause death or serious injury.
Do not aim the gun at, or spray any person or animal.
•
Do not operate the unit when fatigued or under the influence of drugs or alcohol.
Fire and Explosion Hazard
•
Do not exceed the maximum working pressure or temperature rating of the lowest rated system
•
Keep hands and other body parts away from the discharge. For example, do not try to sto
component. See Technical Data in all equipment manuals.
any part of the body.
•
Use fluids and solvents that are compatible with equipment wetted parts. See Technical Data
•
Always use the nozzle tip guard. Do not spray without nozzle tip guard in place.
Pressurized Aluminum Parts Hazard
in all equipment manuals. Read fluid and solvent manufacturer's warnings. For complete
•
Use Graco nozzle tips.
information about your material, request MSDS forms from distributor or retailer.
•
Use caution when cleaning and changing nozzle tips. in the case where the nozzle tip clo
•
Check equipment daily. Repair or replace worn or damaged parts immediately with genuine
manufacturer's replacement parts only.
spraying, follow the Pressure Relief Procedure for turning off the unit and relieving the
Use with equipment with pressurized aluminum parts only. Equipment may have aluminum parts that aren't pres
•
Do not alter or modify equipment.
ized - check with engineering.
before removing the nozzle tip to clean.
•
Use equipment only for its intended purpose. Call your distributor for information.
•
Do not leave the unit energized or under pressure while unattended. When the unit is not
•
Route hoses and cables away from traffic areas, sharp edges, moving parts, and hot surfaces.
off the unit and follow the Pressure Relief Procedure for turning off the unit.
•
Do not kink or over bend hoses or use hoses to pull equipment.
•
High-pressure spray is able to inject toxins into the body and cause serious bodily injury.
•
Keep children and animals away from work area.
that injection occurs, get immediate surgical treatment.
•
Comply with all applicable safety regulations.
•
Check hoses and parts for signs of damage. Replace any damaged hoses or parts.
•
PRESSURIZED ALUMINUM PARTS HAZARD
This system is capable of producing
PRESSURIZED ALUMINUM PARTS HAZARD
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or
rated a minimum of
fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious
Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluid
•
Always engage the trigger lock when not spraying. Verify the trigger lock is functioning pr
containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical
chemical reaction and equipment rupture, and result in death, serious injury, and property damage.
•
Verify that all connections are secure before operating the unit.
reaction and equipment rupture, and result in death, serious injury, and property damage.
•
Know how to stop the unit and bleed pressure quickly. Be thoroughly familiar with the con
Plastic Parts Cleaning Solvent Hazard
Created for CEDs Texture Sprayer. May have use with other waterbase application equipment with plastic parts th
can be damaged by certain solvents.
4
PLASTIC PARTS CLEANING SOLVENT HAZARD
WARNING
WARNING
- Basic
- Use with UL1450 Compliance
WARNING
XXXX
XXXX
psi.
WARNING
psi. Use Graco replacement parts or accesso
GC-1402E
Advertisement
Table of Contents
