Graco 8482 Owner's Manual page 50

5. Lift cover off seat, pushing harness straps,
crotch strap and hardware through slots in
cover. DO NOT USE car seat without the
seat cover.
6. Machine wash cover in cold water on delicate
cycle and drip-dry. DO NOT USE BLEACH.
7. To put the seat cover back on, reverse the
preceding instructions.
Thread the harness
straps through the
appropriate holes
in the seat cover.
See the illustration
at right and section
5.1, "Positioning
the Harness Straps"
(page 16) to
properly secure the
harness straps back
on the seat
8. Secure the seat cover to the seat: wrap the
elastic binding over the top and bottom of the
seat and attach four loops.
.
50