Advertisement
DVD & CD
Loading a DVD or CD
Open the DVD DOOR, and load a
DVD or CD into the TV with DVD
player (label side facing out).
Playing a DVD or CD
1 Adjust the POWER SWITCH on
the side of the unit to the "ON"
position.
2 Press the POWER BUTTON on
the front of the TV with DVD Player.
3 Press the SOURCE button, switch
to DVD mode, and press the
ENTER button.
4 The loaded disc will begin playing
automatically. If it doesn't, press
the PLAY/PAUSE button on the
remote.
12
GPX | TD910B
POWER
Programming a DVD or CD
1 Begin playing a DVD or CD.
2 Press the PROG button on the
remote.
3 Use the NUMBER KEYPAD on the
remote to enter the DVD chapters
and titles, or the CD tracks in the
order you would like them to play.
4 Press the on-screen START button
to begin playing the programmed
DVD or CD.
CUSTOMER HELPLINE | 1-314-621-2881
DVD SETUP MENU
DVD Setup Menu
To access the DVD setup menu,
press the SOURCE button to
switch to DVD mode, then press the
SETUP button on the remote.
General Setup Page
TV Display
Angle Mark
TV Type
Screen Saver
OSD Language
Last Memory
Audio Setup Page
Analog Audio Setup
Preference Page
Audio
Subtitle
Disc Menu
Default
Exit Setup Menu
GPX | TD910B
13
Advertisement
