• CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. • WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. • AveRTIssemeNT: Pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité.
Read these Instructions. Keep these Instructions. Heed all Warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Customer Support: 1-888-999-4215 TAble oF ConTenTs Warnings and Precautions Important Safety Instructions • FCC Warnings • Additional Warnings 22” Class HDTV with DVD • Features • Included Introduction Setup • Power • Remote • TV Stand Television Setup • Connecting a TV Antenna •...
Introduction VolUMe Press to adjust the volume. CHAnnel Press to adjust the television channel. PlAY/PAUse Press to play or pause a loaded disc. RePeAT Press to repeat the current chapter or track or the entire disc. sKIP/seARCH Press to skip between chapters or tracks.
Page 7
PoWeR Press to power the television off or on. sleeP Press repeatedly to set the sleep timer. After the set time has expired the television will automatically power off. AsPeCT Press to adjust the aspect ratio between FULL, NORMAL, WATERGLASS, and CINEMA. PICTURe Press to adjust the picture between STANDARD, MOVIE, USER, and DYNAMIC.
Setup Power AC power: requires an AC power cord (included). Plug the included AC power cord into a standard AC power outlet to power the television. Remote Requires 2, AAA size, batteries (included) TV stand Requires TV stand and 3 screws (included). Use a philips-head screwdriver to tighten the screws. Using an power drill could damage the TV stand.
Connecting a TV Antenna Requires a TV antenna (not included). 1. Connect a VHF, UHF, or HDTV antenna to the RF InPUT on the television. 2. Press the soURCe button to switch to TV mode. 3. Press the MenU button to access the setup menu.
Television Auto scanning for Channels The Auto Channel Scan must be run before any channels can be viewed on the television. 1. Press the soURCe button to switch to TV mode. 2. Press the MenU button to access the setup menu. 3.
setting the Clock 1. Press the MenU button to access the setup menu. 2. Press the ARRoW () buttons to highlight the SETUP icon. Press the enTeR button. 3. Press the ARRoW () buttons to highlight CLOCK. Press the enTeR button. 4.
DVD and CD loading a DVD or CD 1. Gently insert a DVD or CD into the slot-load disc drive, with the label side of the DVD or CD facing the back of the television. Once a DVD or CD is loaded into the television, the TV will automatically switch to DVD mode.
Customer Support: 1-888-999-4215 USB Port and Memory Card Reader Connecting a Memory Card 1. Load an SD, MS, or MMC memory card into the MeMoRY CARD ReADeR as shown in the image to the right. Using a Connected Memory Card 1.
Connecting Other Devices (Set-Top Box, Gaming Device, DVD Player, VCR, or PC) Connecting a set-Top box • You will need: a set-top box, s-video and RCA stereo cables or composite and RCA stereo cables or component and RCA stereo cables or an HDMI cable.
Customer Support: 1-888-999-4215 Connecting a Computer • You will need: a PC with a VGA output, and a PC Audio Input VGA cable. (not included) • Connect the computer’s VGA output to the VGA/PC InPUT on the television. • Power the television on and press the soURCe button to switch to the VGA Mode.
Para transferir esta guía de usuario en inglés, español, o francés, visite la sección de la ayuda en www.gpx.com. Pour télécharger ce guide de l’utilisateur en anglais, espagnol, ou français, visitez la section de soutien chez www.gpx.com. Contact Information Phone: 1-888-999-4215 email: prodinfo@gpx.com...