Table of Contents
Advertisement
5. Enter Subnet.
6. Click "Save" to save the settings, enter the new IP address in your web browser, re-login as
administrator, and go to the "Settings" page to continue.
7. Go to "Current Time & Date" within the "System" menu to configure the appropriate date and time
information. In this section, the changes will be saved automatically.
Modbus Setup
The following will help you set up your RemotEye® ESS to communicate with another system via Modbus
TCP or Modbus RTU.
Modbus TCP Setup:
1. Login to become an administrator and go to the settings page by clicking the "gear" icon on the top
navigation bar.
2. Go to "Modbus" within the "Protocol" menu to set up Modbus settings.
3. Toggle "Modbus TCP/IP Protocol" to "Enabled" (toggle should point to the right).
4. Enter Modbus TCP port number (Default: 502).
5. Click "Save" to save the settings.
6. To see all the available registers go to "User Guide" and click the "Modbus" menu.
RemotEye® ESS Instruction Manual – 201791-002
15
Advertisement
Table of Contents
