Video Setup - GoVideo DV1040 User Manual

VIDEO S
To set the DVD+VCR to match the capabilities of your TV:
ETUP
While in Stop mode, press
1
[SETUP].
Selecting TV ASPECT.
2
If you select "4:3 LB", you can watch the
original widescreen movie, but black bars
will appear above and below the picture.
If you select "4:3 PS", the picture will fill
the screen but the sides of the movie will
be cropped.
If a disc size was recorded in 4:3, you
cannot watch it in wide screen even if TV ASPECT is set to "16:9
WIDE".
Selecting VIDEO OUT.
3
You may set VIDEO OUT to S-VIDEO or
COMPONENT.
* If VIDEO OUT is set to S-VIDEO, you cannot set
SCAN MODE. If VIDEO OUT is set to
COMPONENT, you can set SCAN MODE.
Selecting SCAN MODE.
4
You may set SCAN MODE to
INTERLACED or PROGRESSIVE.
* If SCAN MODE is set to "INTERLACED", connect
Y/Pb/Pr on the DVD+VCR to the INTERLACED
input on your TV.
If SCAN MODE is set to "PROGRESSIVE", connect Y/Pb/Pr on the DVD+VCR to the
PROGRESSIVE SCAN input on your TV.
TV ASPECT 4:3 LB
VIDEO OUT COMPONENT
SCAN MODE INTERLACED
TV ASPECT 4:3 LB
VIDEO OUT 4:3 PS
SCAN MODE 16:9 WIDE
TV ASPECT
VIDEO OUT S-VIDEO
SCAN MODE COMPONENT
TV ASPECT
VIDEO OUT
SCAN MODE INTERLACED
PROGRESSIVE
47